From mid-November, sweaters, scarves, blankets and bed linen fill the home pages of many fashion and home textile shops. Most of these goods are covered by textile labeling under Regulation (EU) No 1007/2011: the fiber composition must be clearly visible to consumers before the purchase, expressly also when the purchase is made by electronic means (EUR-Lex). Demand is high: in the 2024 survey, 48 percent of people aged 16 to 74 in Germany had ordered clothes, shoes or accessories online in the previous three months (Destatis). This article shows what Article 16 of the regulation and the German Textile Labeling Act require of an online shop, and how the fiber composition travels as a checked data field per variant from the PIM system via our PIM integrations to the product page and into the feed.
What Article 16 requires of an online shop
Regulation (EU) No 1007/2011 governs which textile fiber names may be used and how the fiber composition must be stated on labels and markings. As a regulation, it applies directly in the member states; the legislator chose this form so that technical changes do not first have to be transposed into national law (EUR-Lex). Article 16(1) requires the fiber composition descriptions in catalogs, trade literature, on packaging, labels and markings to be easily legible, visible and clear, in uniform print. For online retail, the second sentence of the paragraph is the one that matters:
This information shall be clearly visible to the consumer before the purchase, including in cases where the purchase is made by electronic means.
Art. 16(1) Regulation (EU) No 1007/2011, EUR-Lex
Article 15 sets out who is responsible: the manufacturer, or the importer if the manufacturer is outside the Union. A distributor is itself considered a manufacturer if it places products on the market under its own name or trademark or attaches or modifies the label. And every distributor ensures that the goods bear the required labeling (EUR-Lex).
In Germany, the Textile Labeling Act (Textilkennzeichnungsgesetz) supplements the regulation. Section 4(1) requires the information in German, subsection 4 obliges distributors to ensure the labeling under Article 16, and subsection 5 expressly applies subsections 1 to 4 to textile products offered for sale by electronic means as well (Textilkennzeichnungsgesetz). For the online shop, this means that the distributor itself is responsible for the information on the product page, even if the data comes from the supplier. Other languages may be added as a supplement, but they do not replace the German information (Textilkennzeichnungsgesetz).
The regulation does not prescribe a fixed place; it requires visibility before the purchase. There is therefore much to be said for text on the product page close to the variant selection, rather than only at checkout, in a PDF or in an image. The assessment of an individual case is a legal question; we implement the technical side.
Which goods the labeling requirement covers
The regulation applies to textile products made available on the Union market. Products containing at least 80 percent by weight of textile fibers are treated in the same way (EUR-Lex). The same goes for furniture, umbrella and sunshade coverings whose textile components make up at least 80 percent of the weight, and for the textile components of the upper layers of multi-layer floor coverings, of mattress coverings and of coverings of camping goods (EUR-Lex). For a home textile shop, this covers not only blankets and cushion covers but also sofa covers and mattress covers, provided the weight shares reach the threshold.
Products tailored by self-employed tailors are excluded (EUR-Lex). For some goods, Annex V does not require fiber information, including pot holders, coffee cozies, toys, textile articles for animals and used, made-up textile products explicitly stated as such (EUR-Lex). The PIM should know the exception to the exception: if a trademark contains a fiber name from Annex I, the rules apply to these goods too (EUR-Lex). A soft toy whose brand name contains “silk” therefore does need fiber information after all.
- Knitwear and outerwear: sweaters, cardigans, hats, scarves, gloves
- Home textiles: blankets, throws, cushion covers, bed linen, towels
- Furniture covers and seat cushions, provided the textile components make up at least 80 percent of the weight (EUR-Lex)
- Gift sets made of several textile items: items with a different composition each need their own information
- Fabric sold by the meter: the composition may be stated on the piece or roll, but in the online shop it still belongs on the product page
What the fiber composition has to contain
Article 16 states where and how visibly the information must appear. What it contains is governed by Articles 5 to 11, and for data maintenance these are the actual requirements, because each of them can be expressed as a field rule. Under Article 5, only the textile fiber names listed in Annex I may be used to describe the fiber composition (EUR-Lex). Under Article 9, the name and percentage by weight of all fibers contained are stated in descending order (EUR-Lex). The overview shows the rules that product data maintenance has to reflect:
| Rule | Provision | Consequence for the data field |
|---|---|---|
| Only names from Annex I | Art. 5(1) | Fiber as a pick list, no free text |
| All fibers with percentage by weight, descending | Art. 9(1) | Share as a number, sorted on output |
| “100%”, “pure”, “all” only for exactly one fiber | Art. 7(1) | Allow the term only if a single fiber is recorded |
| “Virgin wool” in a blend only from 25% wool, in an intimate blend with only one other fiber | Art. 8(2) | Tie the name to share and number of fibers |
| Components with different fiber content | Art. 11(1) | Component as a level of its own, such as outer fabric and lining |
| Trademark next to the composition, other information separate | Art. 16(2) | Fiber field separate from marketing copy |
| Official language of the country of sale | Art. 16(3) | Output per language from the fiber ID |
Some thresholds allow simplifications that are easily misunderstood in data maintenance. A product with up to 2 percent extraneous fibers may be treated as a pure product if this share is technically unavoidable under good manufacturing practice and not added systematically (EUR-Lex). For virgin wool, the share of extraneous fibers must not exceed 0.3 percent (EUR-Lex). Fibers with a share of up to 5 percent, or up to 15 percent together, may be grouped as “other fibers” if they are difficult to state at the time of manufacture; their percentage by weight then appears immediately before or after (EUR-Lex). Visible, isolable fibers with a purely decorative effect of up to 7 percent of the weight do not have to appear in the composition (EUR-Lex).
For multi-component products such as a lined coat, the labeling states the fiber content of each component, provided the components do not have the same fiber content (EUR-Lex). Components that are not main linings and make up less than 30 percent of the total weight are exempt (EUR-Lex). For the data model, this means that the composition does not belong to the article but to the component, and the component belongs to the variant.
Annex I has been amended several times since 2011. In the consolidated version of February 15, 2018, the fiber names are listed under 50 numbers; numbers 49 and 50 were added by delegated regulations of 2012 and 2018 (EUR-Lex). In addition, the original German language version listed “Seide” (silk) under number 26; a 2012 corrigendum replaced it with “Polyacryl” (acrylic) (EUR-Lex). Article 16 itself is unchanged in the consolidated version (EUR-Lex). Anyone building the pick list in a PIM should therefore use the consolidated version and recheck it whenever the annex is amended again.
Trademarks, marketing copy and language
Article 16(2) governs how the composition interacts with trademarks. Trademarks or the name of the undertaking may be given immediately before or after the fiber composition. If a trademark itself contains a fiber name from Annex I or a name liable to be confused with it, it even has to appear immediately before or after. Other information is displayed separately (EUR-Lex). For the product page, this means that care instructions, origin, sustainability claims or a phrase such as “wonderfully soft” do not belong on the same line as the fiber composition. In the PIM, this is a question of fields, not of editorial style: the composition gets a field of its own, the marketing copy another one.
Subsection 3 requires the official language or languages of the member state in which the goods are made available to the consumer (EUR-Lex). For Germany, Section 4 of the Textile Labeling Act specifies German (Textilkennzeichnungsgesetz). Anyone also running their shop in French and Dutch needs the fiber composition in the respective language there. The words are given in the language versions of the regulation: for virgin wool, Annex III lists “laine vierge” or “laine de tonte” in French and “scheerwol” in Dutch (EUR-Lex). Whether a German-only shop needs further languages for deliveries abroad has to be clarified legally on a case-by-case basis.
This leads to a simple rule for the PIM: what is stored is not the word but the fiber as an ID, such as its number in Annex I. The word for each language comes from a maintained translation table filled from the official language versions. The German shop then shows “Polyamid” and the English-language offer for Ireland shows “polyamide”, without anyone having to reconcile several free texts. How to organize attributes and translations across several channels is described in our article on PIM strategy and product data sovereignty.
One special case concerns non-textile parts of animal origin, such as leather, fur or horn. The label must then carry the phrase “contains non-textile parts of animal origin” (EUR-Lex). For offers made by electronic means, the German Textile Labeling Act expressly excludes this article (Textilkennzeichnungsgesetz). The field is still worth having in the data model, because it drives the label and can also appear on the product page voluntarily.
Why a photo of the label is not a data source
Some shops show the composition only as a photo of the sewn-in label in the image gallery. Whether that is sufficient in an individual case is a legal question. As a basis for product data, the photo is unsuitable: it cannot be filtered or searched, cannot be passed to a feed and cannot be checked automatically. A screen reader only reads it through a typed-up alternative text, and then the information is back as text in a field, just in the wrong place.
For catalogs, packaging and labels, the regulation requires easily legible information in uniform print (EUR-Lex). Anyone aligning their shop with accessibility under the German BFSG anyway checks contrast and screen reader output of the fiber composition at the same time. The photo of the label remains useful as evidence in the record; how to manage images as master data is covered in the article on media management for product images.
The data model: fiber composition per component and variant
Fiber composition is not the only mandatory information that comes from product data. The energy label in the shop and the mandatory information under the GPSR follow the same pattern: a law requires information before the purchase, and it is only as good as the field it comes from. For textiles, this leads to a model with clear levels: at the top the article with its brand, below it the variants, because colors of the same knitwear line sometimes differ in composition. Each variant has its components, for a lined coat the outer fabric and the lining, and each component carries a list of fiber ID and percentage by weight.
{
"item": "10234",
"brand": "Example Brand",
"variant": "10234-SA",
"color": "Sage",
"components": [
{
"component": "outer fabric",
"fibers": [
{ "annex_i_no": 1, "qualifier": "virgin wool", "share": 70 },
{ "annex_i_no": 30, "share": 30 }
]
}
],
"animal_parts": false,
"evidence": "supplier-datasheet-10234.pdf",
"status": "complete"
} The fiber is stored as its number in Annex I, not as a word: number 1 is wool, number 30 polyamide (EUR-Lex). The qualifier “virgin wool” is a field of its own because it depends on conditions. In a blend, it may only be used if the wool makes up at least 25 percent of the total weight, is mixed with only one other fiber in the case of an intimate blend and itself meets the conditions for virgin wool (EUR-Lex). The example with 70 percent virgin wool and 30 percent polyamide meets these conditions. If elastane were added as a third fiber in an intimate blend, the composition could no longer use the name “virgin wool”.
The evidence field is not red tape. Distributors must keep documents on the facts the fiber composition is based on for as long as they make the products available on the market; manufacturers and importers for two calendar years, counted from the end of the year in which they placed the last product concerned on the market (Textilkennzeichnungsgesetz). If there is reasonable suspicion, market surveillance can require these documents to be submitted within ten days of the request (Textilkennzeichnungsgesetz). If the datasheet, test report or label photo is attached to the record, such a request becomes a search rather than a project.
Pick list instead of free text
Fibers as IDs from Annex I of the consolidated version, the words for each language from a maintained table.
Shares as numbers
Percentage by weight per fiber as a number, a sum check per component, sorting only on output.
Components as a level of their own
Outer fabric, lining and trim with their own composition when their fiber content differs.
Evidence attached to the record
Datasheet, test report or label photo stay with the record for as long as the goods are offered.
Check rules before release
A data field alone does not prevent a gap. The model only becomes effective with rules that run before the handover to the shop and the feed and do not release a variant without complete information in the first place. In the mockup above, this is the “Rust” variant: the color has been created, the composition is missing, so it stays blocked while the other two colors are on sale. These checks have proven useful:
- No textile variant without a recorded component and fiber; goods listed in Annex V carry an explicit flag instead of an empty field.
- The shares per component add up, and rounding remainders are not distributed silently.
- Fibers come from the Annex I pick list, free text is rejected.
- The terms “100%”, “pure” and “all” are only permitted if a single fiber is recorded.
- The qualifier “virgin wool” in a blend requires at least 25 percent wool and, in an intimate blend, only one other fiber.
- For each active shop language, there is a word for the fiber ID.
- The record has evidence attached, with date and origin.
When market surveillance checks a product, a manufacturing tolerance of 3 percent applies between the stated composition and the composition determined in the lab, related to the total weight of the fibers stated (EUR-Lex). It absorbs variations in production. It is not meant for values that were estimated or copied from a similar article: the information comes from the manufacturer or supplier and is taken over with evidence.
From the PIM to shop, feed and marketplace
In the data flow, the fiber composition has one origin and several consumers. The origin is usually the supplier's datasheet or item list, and for private labels the company's own product development. From there it goes into the ERP or directly into the PIM, is checked and released, and is then distributed to the shop, to product feeds and to marketplaces. Anyone who does not want to type attributes from supplier documents by hand will find a way to do it in the article AI datasheet extraction. The check rule stays the same, because an extracted value only becomes valid information once it has been verified.
In the shop, the information needs a structured target. In a Shopware shop, the composition can be modeled as a custom field on the product and the variant and output in the product page template; as a property, the material is especially suitable if customers are meant to filter by it. What matters is that the output changes along with the variant and that the product copy does not repeat the information a second time by hand. How variants are mapped cleanly to URLs and structured data is described in the article on product variant SEO and duplicate content.
For Google Shopping, there is the “material” attribute material]. It accepts only one value; if a product is made of several materials, a primary material and up to two secondary materials can be given, separated by a slash (Google Merchant Center Help). The field is limited to 200 characters (Google Merchant Center Help). If variants differ in material, Google recommends also stating it in the “variant option” attribute [variant_option] (Google Merchant Center Help). The feed value is therefore a derivative, not a copy: the full composition belongs on the product page. More on this in the article [optimizing the Google Shopping feed and on our page on the Google Merchant Center integration.
The same principle applies to marketplaces, with different field names: through our marketplace integrations, the same checked information reaches the connected channels instead of being maintained again for each one. Anyone currently choosing a new merchandise management system should check these fields as part of it; what matters there is covered in the article on ERP selection for online retailers.
How the information appears on the product page
Once the data field is clean, the output remains. We recommend these points as a starting point:
- The information appears as text close to the variant selection and the add-to-cart button, not only in a collapsed tab at the bottom of the page.
- It changes with the selected variant and is already present in the delivered HTML, so it can be read without scripts and by search engines.
- It uses the same font as the rest of the product copy and has sufficient contrast.
- With several components, the component comes before its composition, for example “Outer fabric: …, lining: …”.
- Trademark and fiber composition stand together, marketing claims and care instructions on separate lines.
- If the shop offers quick purchase from the category page or the wish list, the information appears there too, because purchases are made there as well.
In fashion shops, the size chart belongs in the same zone as the composition, and both come from the PIM rather than from free text. How size charts can be built per brand and cut is shown in the article on size advice with size charts in a fashion shop.
Market surveillance, fines and unfair competition law
The market surveillance authorities of the German federal states check whether textile products are labeled correctly and whether the stated composition is accurate; this applies accordingly to offers made by electronic means (Textilkennzeichnungsgesetz). A distributor that fails to ensure the labeling commits an administrative offense under Section 12. The offense can be punished with a fine of up to €10,000 (Textilkennzeichnungsgesetz).
Alongside this is unfair competition law. Under Section 5b(4) of the German Act against Unfair Competition (UWG), information that must not be withheld from consumers in commercial communication under EU regulations is deemed material (UWG). Missing fiber information can therefore be assessed as withholding material information and lead to cease-and-desist letters. Assessing an individual case is a matter for legal advice; technically, the same check rules that raise data quality also reduce the risk.
Anyone maintaining the fiber composition in a structured way has laid the foundation for further requirements. The digital product passport also relies on structured product data rather than images and free text.
Schedule until Black Week
Between the publication of this article and Black Friday on November 27, there is just over a week. That is not enough for a new PIM, but it is enough for the most important steps for the articles promoted in the holiday season:
- Measure the inventory: count active textile articles and variants without a structured fiber composition, broken down by product group.
- Secure the sources: attach datasheets and supplier lists to the record, request missing information from the supplier, and if in doubt read it from the label on the goods.
- Create the pick list: fibers from Annex I of the consolidated version, words for each shop language.
- Switch on the check rule, first as a report, then as a block for new variants.
- Connect product page and feed: output per variant, derived feed value.
- After Black Week, bring the rest of the inventory up to date and extend the block to all variants.
If you cannot do everything at once, start with the variants featured in promotions, newsletters and feeds. That is where visibility is highest, and where a gap is most likely to be noticed.
How we connect fiber compositions
We connect PIM and ERP systems to shops and set up the fiber composition as a separate, checked data field. Our work on integrations for PIM systems covers the data model with components and variants, the Annex I pick list with translations, the check rule before release and the output on product page, feed and marketplace. Missing information can be prefilled from supplier documents with our AI-assisted data enrichment; release only happens after the check.
This is what your fashion shop could look like:
Editorial Fashion Shop
This article is based on Regulation (EU) No 1007/2011 on EUR-Lex, consolidated version of February 15, 2018 and original version from Official Journal L 272 of October 18, 2011; on the German Textile Labeling Act (Textilkennzeichnungsgesetz) and Section 5b of the German Act against Unfair Competition (UWG) on gesetze-im-internet.de; on press release No. 446 of the Federal Statistical Office (Destatis) of November 28, 2024; and on the Google Merchant Center Help on the “material” attribute. All information retrieved on November 2, 2026. This article is not legal advice.
Yes. Under Article 16(1) of Regulation (EU) No 1007/2011, the information must be clearly visible to consumers before the purchase, expressly also when the purchase is made by electronic means (EUR-Lex). Showing it as text on the product page, close to the variant selection and the add-to-cart button, has proven effective.
Whether a photo alone is sufficient is a legal question that depends on the individual case. As product data, it is unsuitable because it can neither be filtered nor checked automatically. We recommend the information as text and the photo as additional evidence.
The terms “100%”, “pure” or “all” are reserved for products composed exclusively of one fiber (EUR-Lex). An extraneous fiber share of up to 2 percent is permitted if it is technically unavoidable under good manufacturing practice and not added systematically (EUR-Lex). A deliberately added share of elastane, on the other hand, belongs in the composition.
For products made available in Germany, Section 4 of the German Textile Labeling Act requires German (Textilkennzeichnungsgesetz). Further languages may be added. Anyone running shops for other member states shows the information in their official language; the fiber names are given in the language versions of the regulation (EUR-Lex).
We recommend not releasing such variants. A check rule in the PIM or before the handover to the shop detects empty or incomplete information and holds the variant back until the data is available. The rest of the article remains on sale, and a gap usually reaches neither the product page nor the feed.
That depends mainly on the data situation. If supplier lists with shares are available, the transfer is usually a matter of mapping and checking. If the information is missing, the request to the supplier determines the schedule. You can get an assessment for your data via our contact page.